Flake and Chip Epoxy Floors in Gibraltar, MI

Flake and chip epoxy floors in Gibraltar MI are a practical choice for commercial properties that need a floor to survive forklifts, foot traffic, spills, and Michigan's freeze-thaw seasons. The system is a broadcast: a base coat of resin goes down, vinyl flake chips are cast into it by hand until the surface is fully covered, the excess is scraped back, and everything is sealed with clear coats. The result is a hard-wearing, speckled floor with real texture underfoot.

That texture is the main reason property owners pick flake over a smooth epoxy coat. A broadcast flake surface reads as noticeably less slippery than a seamless gloss coat, which matters in entryways, locker rooms, shops, and anywhere water or snow gets tracked in. The flake also hides dirt, scuffs, and small debris between cleanings — a genuine advantage in busy facilities where the floor never looks perfect for long.

More detail on the system itself is covered in our guide to flake epoxy flooring.

How the Broadcast System Works

The process is straightforward but labour-heavy, which is why prep and application quality matter more than the product on the shelf:

  1. Surface preparation. The existing concrete is mechanically ground or shot-blasted to open the surface and remove coatings, sealer, and contaminants. Epoxy bonds to clean, profiled concrete — nothing else.
  2. Base coat. A pigmented epoxy or polyaspartic base is applied.
  3. Broadcast. Vinyl flake is cast into the wet resin until rejection — the surface can't hold any more.
  4. Scrape and sand. Once cured, excess flake is scraped off so the surface is even.
  5. Seal coats. One or more clear coats lock the flake in and set the final sheen and texture.

Choosing a Flake Blend

This is an in-person decision. Flake blends are selected from physical samples, not from a screen — colours and chip density look very different in a catalogue photo than under your own lighting against your own walls. We bring sample boards to the site, look at them in the actual space, and talk through chip density: a full broadcast hides the base coat completely, while a lighter broadcast lets more of the base colour through for a subtler look.

Commercial spaces in Gibraltar most often go with greys and tans that hide dirt and match existing trim, but the blend is your call once you've seen the samples.

Where It Performs Well

Typical applications for flake and chip epoxy floors:

What Drives Cost

We don't quote firm prices without seeing the floor. Cost depends on:

As a general range, commercial flake systems typically fall somewhere between a basic solid-colour epoxy coat and a high-build resinous system. You'll get an exact number with the quote.

Warranty and Next Steps

Installed floors are covered by a written warranty on workmanship. The terms are spelled out in writing before work starts — ask to see it with your quote.

Gibraltar sits right on the Detroit River, and the same moisture and salt exposure that's hard on docks and pavement is hard on interior concrete too. If you're comparing options across the area, see our other work in Gibraltar, MI.

For flake and chip epoxy floors on your commercial property, use the quote form on our website. Send your square footage, location, and a rough description of the space, and we'll schedule a site visit and a written estimate.