When you're choosing a contractor for polyaspartic and polyurea coatings, the product matters less than the process. These materials cure fast and perform well, but only when they're applied to a properly prepared slab, at the right temperature, by someone who knows the system they're installing. A good contractor will talk about all three. A bad one will talk only about how fast you can walk on the floor.
This page gives you a practical checklist. If you want the full background on how these coatings work, start with our pillar page on polyaspartic and polyurea coatings, then come back here and use it as a vetting guide.
Surface prep is where most coating failures start. The correct answer involves mechanical preparation — diamond grinding or shot blasting — to open the concrete and remove contaminants. Coatings bonded to untreated or lightly cleaned concrete are a delamination waiting to happen.
Ask directly:
A contractor who plans to mop on a coating over an unprepared floor is saving themselves time and costing you the floor's lifespan.
"Polyaspartic" isn't one product. Full-flake, clear, solid-colour, and hybrid systems all behave differently, and some contractors use a polyurea base coat under a polyaspartic top coat — a legitimate, common build. What matters is that the layers, mil thickness, and number of coats are written into the quote, not described loosely on a sales visit.
The quote should specify:
Fast cure is the real selling point of polyaspartic and polyurea coatings, and it's a genuine one. But the "back in service in one day" pitch depends on the system, the ambient temperature, and the condition of the slab. Cold slabs slow the cure. Damp concrete can force a moisture-tolerant primer first. Complex repairs add time.
A contractor worth hiring will quote return to service per job — light foot traffic, then full use, based on your specific conditions — rather than promising it as a blanket rule. If someone guarantees a one-day turnaround over the phone without asking about your slab or the season, that's a red flag, not a selling point.
Ask for the warranty in writing before you commit, and read what it actually covers. Our written warranty on workmanship for installed floors is something we take seriously and honour — not a marketing line. Whatever contractor you use, you want the same: a document that names the coverage, what voids it, and how a claim gets handled.
Also ask about maintenance. These floors are low-maintenance, not no-maintenance. A contractor who explains how to care for the coating is one who expects it to last.
Per-job pricing is normal for this work, and anyone quoting a flat number sight-unseen isn't quoting your floor. The main cost drivers:
Get itemised quotes from at least two contractors so you can compare prep and system, not just the bottom line.
A confident contractor answers these easily and puts the answers in writing. That's the real test when choosing a contractor for polyaspartic and polyurea coatings: not the brochure, but the paperwork.
Every floor gets priced on its own slab, system, and conditions — no generic numbers, no pressure. Send us the details through the quote form on our website and we'll come back with a written, itemised scope covering prep, system, timeline, and our written workmanship warranty. For the technical background behind any recommendation, see our full guide to polyaspartic and polyurea coatings.