Flake and Chip Epoxy Floors for Warehouses and Distribution

Flake and chip epoxy floors for warehouses and distribution are a broadcast system, not a simple coating. The resin goes down, vinyl flake is broadcast into it by hand, excess flake is scraped back, and the whole thing is sealed with one or more clear topcoats. The result is a hard-wearing, slip-resistant floor with a speckled finish that does a far better job of hiding dust, scuffs, and tyre marks than a plain smooth coat.

That combination matters in warehouses and distribution facilities, where floors take forklift traffic, pallet dragging, and constant foot movement, and where appearance still counts when clients, auditors, or prospective tenants walk through.

How the broadcast system works

A flake floor is built in layers:

  1. Preparation — the concrete is ground or shot-blasted to open the surface.
  2. Base coat — a pigmented epoxy or polyaspartic base is applied.
  3. Broadcast — vinyl flake is cast into the wet resin at partial or full saturation. Full broadcast means the flakes cover the entire surface.
  4. Scrape and sand — once cured, excess standing flake is knocked back so the profile is even.
  5. Seal coats — one or more clear topcoats lock the flake in and determine the final texture and gloss.

The number and thickness of the seal coats drive both the final look and the cost. Fewer coats leave a more textured, matte surface. More coats build a smoother, glossier, easier-to-squeegee floor.

Why texture matters in warehouses and distribution

The flake adds texture to the surface, which is why a flake floor reads as less slippery than a smooth epoxy coat under the same conditions. In warehouses and distribution buildings you have a mix of risks: smooth concrete and smooth coatings can get slick where forklifts turn, where dust settles, or near dock doors where moisture tracks in. The textured flake profile gives footwear and forklift tyres something to grip.

The trade-off is cleanability. A heavily textured floor holds slightly more dust in the low points than a glass-smooth coat. That's why the speckled pattern is such a practical fit — it hides the dirt that does accumulate between sweeps, so the floor looks presentable even in a working facility.

Two honest limitations worth knowing before you specify it:

Choosing a blend

Flake comes in a huge range of colour blends, and the right choice depends on your facility. Common approaches in warehouses and distribution:

One practical point: choose your blend from physical samples, not from a screen. Photos of flake floors are unreliable — cameras exaggerate colour saturation, and a blend that looks subtle on a monitor can read busy in person, or the reverse. We bring sample boards so you can see the actual flake size, density, and colour mix under your own lighting before you commit.

What drives the cost

We won't quote firm prices without seeing the slab, because the variables matter too much. Cost drivers for flake and chip epoxy floors include:

Why choose this system over a plain epoxy coat

A solid-colour epoxy is cheaper up front, but it shows every scuff, and a smooth coat is slicker when dusty or damp. Flake and chip epoxy floors cost more per square metre but hold their appearance longer in real warehouse conditions, hide wear between cleans, and give you traction for free. Over the life of the floor, that usually justifies the difference — especially in customer-facing or leased space.

Every installed floor carries our written warranty on workmanship, honoured as written — not just offered.

See our full overview on our warehouses and distribution flooring page, including other coating options for industrial slabs.

Get a quote

Send us your floor details through the quote form on our website — approximate square metres, slab condition, and how the facility operates — and we'll come back with a realistic scope and price range for your flake and chip epoxy floor.