Flake and chip epoxy floors for commercial kitchens, breweries and food production are built around one practical problem: these spaces stay wet, get hosed down daily, and can't shut down for constant floor repairs. A standard smooth epoxy coat can work, but it often reads as slippery under grease, wort, or standing water. The flake system exists to fix that without giving up the seamless, easy-to-clean surface that food and beverage operations need.
Flake and chip epoxy floors are installed as a broadcast system. The base coat of resin is applied, then vinyl flakes are cast (broadcast) into it while it's still wet, saturating the surface. Once cured, the excess flakes are scraped back and the floor is sealed with one or more clear topcoats.
The result is a speckled, decorative-looking floor that is actually a workhorse. The flakes sit in the resin rather than on top of it, so they don't shed or tear loose under cart traffic. The sealed surface is seamless, with no grout lines or seams for food debris and bacteria to collect in, which matters for any washdown-regulated environment.
Commercial kitchens are the hardest environment on floors in most buildings. Grease, hot water, dropped equipment, constant foot traffic, and daily deep cleaning all attack the surface at once.
The flake system holds up because:
Breweries and food production facilities share a specific set of stresses: sugary or acidic spills, constant moisture, thermal shock from hot washdowns, and heavy keg, pallet, and tank traffic.
Flake and chip epoxy floors handle these conditions because the full broadcast creates a thicker, more resilient film than a single-coat system. The flakes themselves are inert vinyl, so they don't react with beer, brine, dairy, or cleaning chemicals. Under keg stacks and pallet jacks, the system resists gouging better than a thin coating.
For production areas, the seamless finish also simplifies HACCP and audit prep - fewer places to harbour contamination means faster inspections and fewer floor-related findings.
The flake colour blend is a real decision, and it's made from physical samples, not from a screen. Photos of flake blends are consistently misleading - the density and mix of colours doesn't translate to a monitor. We bring sample boards so you can see the blend at actual size, under your lighting, next to your walls and equipment before committing.
That said, appearance is secondary here. Most clients in kitchens and production choose mid-tone blends for one reason: they hide everything. Very light blends show staining; very dark blends show dust and flour. A mid-tone speckle is the practical choice, and it happens to look professional too.
We won't quote a firm price without seeing the space, because the variables matter more than any published rate. What actually drives cost on these floors:
Ranges vary widely by region and project scope. The quote we provide breaks out prep, materials, and labour so you can see exactly what you're paying for.
Installed flake and chip epoxy floors come with a written warranty on workmanship. It's a real document with real terms, and it's honoured - if something fails because of how we installed it, we come back and fix it.
If you're planning a floor for a kitchen, brewery, or production space, the fastest way to move forward is to request a quote through the form on our website. Tell us the square footage, what the space is used for, and your timeline, and we'll come back with a scoped proposal and a chance to review flake samples in person.
For how this fits into the wider food and beverage sector, see Flake and Chip Epoxy Floors for Food and Beverage Facilities.
Get a scoped quote for your facility. Submit the quote form on our website with your square footage and usage details. We'll respond with a written proposal and sample boards for review - no obligation, no guesswork.