Epoxy floor repair and recoat for warehouses and distribution facilities is a different job from a fresh installation. The slab already exists, the traffic is already there, and the goal is to bring a worn or damaged resin surface back to a condition that handles forklifts, pallet trucks and daily cleaning without closing the building for a full strip-out and reinstall.
This page covers how we approach repair and recoat work in warehouses and distribution centres, what can realistically be fixed, and when a recoat is the wrong answer.
Floors in warehouses and distribution environments take more abuse than almost any other commercial surface:
The result is usually the same pattern: joint lines and traffic lanes fail first, the rest of the floor looks tired, and someone starts asking whether the whole thing needs redoing.
Epoxy floor repair and recoat work sits on a spectrum. The right answer depends on how much of the coating is still bonded and what condition the concrete is in.
Spot repairs suit localised damage – chipped joints, impact craters, patches of delamination. We grind out the failed material, repair or re-profile the substrate with an appropriate filler or repair mortar, and blend the coating back in. In many buildings this handles the problem areas for a fraction of the cost of a full recoat.
Full recoats suit floors where the coating is worn but still broadly bonded. The existing surface is mechanically prepared, defects are repaired, and a new coating system goes down. This restores slip resistance, dust control and cleanability, and it can usually be worked around operating hours in phases.
Re-profiling matters where joints have broken down or the slab has moved. A recoat over a joint that keeps moving will fail again. Joint repair and stabilisation come first, or the recoat isn't worth doing.
Sometimes the honest recommendation is that the existing coating needs to come off entirely and the floor needs taking back to concrete. That happens when:
We tell you this before the work starts, with an explanation of why, not partway through the job. If a quote is written as a recoat and preparation reveals the floor can't support one, that's a conversation, not a surprise invoice. Where a strip-back is genuinely the better option, we price it that way from the outset – which is often cheaper than recoating a floor that will fail again in a year.
Most warehouses and distribution centres can't shut down for floor work. Repairs and recoating are usually phased:
The phasing plan is part of the quote, not an afterthought.
We don't publish firm prices because repair and recoat costs vary enormously with the state of the slab. The main drivers are:
As a rough frame, spot repairs are the low end, full recoats sit in the middle, and floors needing strip-back to concrete are the high end. A site inspection is what turns that into a real number.
See our full overview of flooring for warehouses and distribution for new installations, specifications and other industry work.
Send us your floor details through the quote form on our website – square footage, location, and what's failing. We'll inspect the slab, tell you whether you need repairs, a recoat or a strip-back, and quote accordingly. All installed floors come with a written warranty on workmanship.