If you're pricing out flake and chip epoxy floors, the quotes you'll see cover a lot more than "paint on concrete." Understanding what's included in flake and chip epoxy floors helps you compare bids fairly and spot the ones that are quietly skipping steps. A proper flake system is a multi-layer build — prep, primer, base coat, flake broadcast, and a topcoat — and every layer matters. This page walks through each one so you know what you're paying for.
For the full picture on the system itself, start with the main guide to flake and chip epoxy floors. This page breaks down the components of an installation.
Nothing in the rest of the system works if the concrete isn't prepared correctly. Prep is typically the most labor-intensive part of the job and it's the step that budget installers cut first.
Standard prep includes:
If a quote doesn't mention prep, ask what it includes. Grinding vs. acid etching is a real difference — acid etching is cheaper and less reliable.
After prep, the floor gets a base coat that locks in and bonds to the concrete. The base coat is usually tinted to complement the flake blend, since it will be visible in the gaps between flakes and sets the overall tone of the finished floor. In higher-build systems, the base coat may be applied thick enough to accept a full flake broadcast.
This is the layer that defines the look. Decorative vinyl chips are broadcast into the wet base coat by hand until the surface is saturated — either full broadcast (100% coverage, for the densest, most durable result) or partial broadcast (for a lighter, more decorative finish).
Most suppliers offer a range of standard blends — grays, earth tones, neutrals, and bolder mixes — and custom blends are often possible. This is the part of the job that should be chosen in person. Color on a screen varies wildly depending on your monitor and lighting. Flake blends are selected from physical samples, ideally viewed in the actual space where the floor will go, because lighting changes how the blend reads.
Flake does more than look good. The chips add texture to the surface, which is why a flake floor reads as less slippery than a smooth single-coat epoxy under the same conditions. That texture also hides minor imperfections in the slab and stands up well to visible wear.
After the base coat and flakes cure, the floor is scraped to knock down any flakes sitting proud of the surface, then vacuumed and cleaned. This step is easy to skip and easy to spot later — you'll feel the roughness underfoot and the topcoat will sit unevenly.
The topcoat seals everything and determines the final sheen, durability, and cleanability. Options vary:
The number of topcoat coats is a legitimate difference between quotes. One thin coat is not the same as two properly built coats.
Beyond the core layers, here's where quotes typically diverge:
| Item | Sometimes included, sometimes not |
|---|---|
| Crack and pit repair | Often limited to minor repair; extensive repair may be priced separately |
| Moisture mitigation | Usually only flagged if testing shows a problem |
| Cove base / wall detailing | Common in commercial jobs, optional in residential |
| Demolition of existing flooring | Frequently a line item |
| Number of topcoat coats | Varies by system and budget |
None of these are hidden fees when disclosed properly — but you should be able to read a quote and see exactly which layers and steps are included.
Without pinning exact numbers (every slab is different), the main cost drivers are:
When comparing bids, normalize for the system being quoted, not just the price. A cheaper bid with fewer topcoats and lighter prep isn't the same product.
A typical two-car garage flake installation takes two to three days: prep and base coat with flake on day one, scraping and topcoat after the cure, with light foot traffic usually fine the following day and vehicles after the full cure. Larger commercial jobs are scheduled in sections to keep facilities usable. Your installer should give you a cure and traffic timeline in writing.
A properly installed flake system should come with a written warranty on workmanship covering things like adhesion and application defects. Ask to see the warranty terms before you sign anything — a verbal guarantee isn't worth much if the floor lifts in a year.
So — what's included in flake and chip epoxy floors, at minimum? Grinding and prep, repairs as needed, a tinted base coat, a flake broadcast chosen from physical samples, scraping and cleaning, and a clear topcoat suited to your traffic. Anything less and you're not comparing the same product.
If you'd like a quote based on your actual slab and space, fill out the quote form on our website. We'll review the details and come back with a spec and price — no phone tag required.