Choosing a contractor for Epoxy Floor Repair and Recoat

Most people shopping for an epoxy floor repair and recoat want the same thing: a floor that looks new without paying for a complete tear-out. The problem is that choosing a contractor for epoxy floor repair and recoat is harder than it looks, because the cheap answer and the correct answer are not always the same one. A recoat over a floor with delamination, moisture drive, or failed adhesion will fail again, usually within a year or two. A good contractor tells you that before the work starts. A bad one takes the money, rolls the coating, and is hard to reach when it peels.

This page covers how to tell the difference, what to ask, and what a fair process looks like. For the broader repair options, see the main epoxy repair guide.

First question: recoat or full repair?

A recoat is only appropriate when the existing coating is still well bonded, the concrete underneath is sound, and surface wear is the actual problem — scuffing, dulling, minor scratches, light staining. If the coating is lifting, chipping at edges, or bubbling, the failure is below the surface, and a recoat just covers it up.

Sometimes a recoat is the wrong answer and the floor needs taking back to concrete. That should be said before the work, not during. If a contractor quotes a recoat without inspecting the floor — ideally without at least checking adhesion in a test area — that is a red flag. A proper assessment looks at:

What to ask before you commit

What happens if the coating fails to bond? A competent contractor has a plan: mechanical profiling of the existing surface, moisture testing, possibly a primer coat. If the answer is "it'll be fine," keep looking.

Is a recoat actually going to last on my floor? You want a contractor who can tell you when the answer is no. Honesty about needing a full strip-and-recoat — which costs more — is a better sign than a low quote for a fix that won't hold.

What preparation is included? The single biggest cost driver in an epoxy floor repair and recoat is surface prep. Grinding or shot-blasting the existing floor, repairing cracks, and degreasing take most of the labour hours. A quote with no prep line item usually means no prep.

What is the coating system? Number of coats, mil thickness, type of topcoat. A single thin coat over a worn floor is a short-term cosmetic fix.

What's in writing? You should get the scope, the prep method, the products used, and the warranty on paper before work begins.

Cost drivers, not fixed prices

We won't quote a firm price sight-unseen, because it would be made up. What actually moves the cost:

Expect a range, and expect the contractor to explain which end of the range you're on and why.

Warning signs

What we do differently

We inspect first, quote second. If your floor needs to be taken back to concrete, you hear that before you sign anything. If a recoat is genuinely the right call, we say so and explain why it will hold. Every installed floor carries a written warranty on workmanship, and we honour it — if something goes wrong because of our work, we come back and fix it.

For the full picture on repair methods, recoating systems, and when each applies, read our main guide: Epoxy Floor Repair.

Next step

Submit the quote form on our website with a brief description of your floor, its approximate size, and its current condition. We'll arrange an inspection and give you a written recommendation — recoat, repair, or full resurfacing — with an honest assessment of what will actually last.