Flake and chip epoxy floors in West Bloomfield MI are a practical choice for commercial properties that need a floor to hold up under real traffic. This page explains how the system works, where it performs best, and what drives the cost of an installation. For a broader look at the product itself, see our flake epoxy guide, or visit our West Bloomfield service page.
A flake and chip floor — often called a broadcast system — is built in layers. First, a primer or base coat of epoxy goes down. While that base is still wet, vinyl color flakes are broadcast by hand across the entire surface until it can accept no more. Once the base cures, the excess flakes are scraped and the floor is sealed with one or more clear topcoats, typically polyaspartic or polyurethane.
The result is a dense, speckled surface with visible texture. The flakes aren't just decorative — they build body into the coating, which is the main reason a flake floor reads as less slippery than a smooth, single-coat epoxy. There's grip underfoot even when the surface is clean and dry.
Three reasons come up again and again:
It hides dirt. The multi-color blend breaks up visual noise, so dust, scuffs, and tire marks don't announce themselves the way they do on a solid-color floor. That matters in retail, medical, and office-adjacent spaces where the floor is judged every day.
It wears hard. The broadcast layer creates thickness you can feel. Foot traffic, cart wheels, pallet jacks, and dropped tools all hit a system with real body, not a thin film.
It's slip-resistant without grit additives. The flake texture itself does most of the work. Where codes or insurance require more, an aggregate can be added to the topcoat.
Common applications include showrooms, back-of-house retail, restrooms and locker rooms, medical and dental offices, auto service bays, and light manufacturing floors.
Blend selection is done from physical samples, not from a screen. Photos of flake floors compress color badly — a blend that looks gray and neutral on a monitor often reads blue or brown in person, and flake size changes the pattern again. We bring sample boards so you can see the actual flake sizes, densities, and color mixes under your own lighting, next to your own walls and fixtures. That's the only reliable way to pick.
We don't quote firm prices sight unseen, and you should be wary of anyone who does. Cost depends on:
As a general frame, commercial flake systems fall in a mid-range band — more than a single-coat solid epoxy, less than thick-film mortars or quartz systems. An on-site look at your slab is what turns a range into a number.
Most commercial flake installations run two to four days depending on size and prep. Grinding and repair take the first day or so; base coat and broadcast the next; scraping, sealing, and cure after that. Light foot traffic is often possible within a day of the final topcoat, with full use shortly after. We schedule around your hours to limit downtime.
Installed floors come with a written warranty on workmanship. It's a real document with real terms — not a verbal assurance — and we honor it. We'll walk you through what it covers before any work begins.
If you're evaluating flake and chip epoxy floors for a property in West Bloomfield, MI, the next step is a site visit and a written quote. Use the quote form on our website — tell us the square footage, the current floor condition, and how the space is used, and we'll take it from there.