Flake and Chip Epoxy Floors in Oxford, MI

Flake and chip epoxy floors in Oxford MI are built for commercial spaces that take a beating: shop floors, auto bays, storage areas, showrooms, back-of-house retail, and light industrial workspaces. The system is straightforward. We roll down a resin base, broadcast vinyl flakes into it while it's wet, let it cure, scrape the surface flat, and seal it with a clear topcoat. The result is a speckled, hard-wearing floor with real texture underfoot.

How the Broadcast System Works

A flake floor isn't one coat — it's a layered build:

  1. Surface prep. The concrete is ground to open the pores and remove old coatings, oil, or contaminants. This step decides whether the floor bonds or peels.
  2. Base coat. A pigmented epoxy or polyaspartic resin goes down.
  3. Flake broadcast. Vinyl flakes are cast into the wet resin until it's fully saturated. We use more flake than the surface needs, then sweep the excess.
  4. Scrape and recoat. Once cured, the surface is scraped smooth and any pinholes are filled before sealing.
  5. Clear topcoat. A sealed finish locks in the flakes and sets the sheen — satin or gloss, depending on the space.

The finished floor is seamless, so there are no grout lines or joints collecting grime. Spills wipe up. Dust mopping handles the day-to-day.

Why Flake Reads as Less Slippery

The texture matters. A smooth epoxy coat is glass-like when clean and can get slick when wet. The flake layer adds grit to the profile, so the floor has more grip underfoot — one reason it's a common choice for areas with foot traffic, forklifts, or the occasional wet spot. If a space needs a higher coefficient of friction, we can adjust the topcoat or add an anti-slip additive to the seal coat. We'll talk through that during the walkthrough rather than guess.

Choosing a Flake Blend in Person, Not on a Screen

Flake colors and blends don't translate accurately through a monitor. Camera compression, screen settings, and lighting all shift how a sample reads. We bring physical samples to the site and blend combinations under your actual lighting so you're choosing what the floor will actually look like — not a stylized photo. Blends range from neutral grays and tans that hide dirt well to bolder multicolor mixes for showrooms and branded spaces. A dirt-hiding speckle is a real operational advantage: the floor keeps looking clean between cleanings, which matters in high-traffic commercial settings.

What Drives Cost

We don't quote firm prices without seeing the slab. The main variables:

Most commercial flake floors fall in a mid-range budget compared to other resinous systems — more than a single solid-color coat, less than full troweled mortar systems. You'll get a written, itemized quote after the site visit.

Serving Oxford Businesses

We install flake and chip epoxy floors across Oxford, MI and the surrounding area. For a deeper look at the system itself — including residential applications and blend options — see our flake epoxy guide.

Every installed floor is backed by a written warranty on workmanship. If something in our install fails, we come back and fix it — that's the point of putting it in writing.

Get a Quote

Submit the quote form on our website with a few details about your space: square footage, current floor condition, and how the space is used. We'll schedule a site visit, walk the slab with you, bring samples, and give you a written quote. No pressure, no guesswork.