Flake and Chip Epoxy Floors in Grosse Pointe Woods, MI

If you run a shop, clinic, salon, garage, or light industrial space in the area, flake and chip epoxy floors in Grosse Pointe Woods, MI are worth a close look. The system is straightforward: a resin base coat is applied to the prepared slab, vinyl color flakes are broadcast into it until the surface is fully covered, and once it cures, the excess flake is scraped and the whole floor is sealed with a clear topcoat. The result is a hard-wearing, speckled floor with real texture underfoot.

For a fuller breakdown of the system itself, see our guide to flake epoxy flooring. For how we handle work in this city specifically, see our Grosse Pointe Woods service page.

Why Flake Reads as Less Slippery

The flake is what sets this system apart from a smooth rolled coat. Because vinyl flake sits in the resin and through the seal coat, the finished surface has a fine, irregular texture. That texture gives shoes something to grip, which is why flake floors feel noticeably less slippery than gloss smooth epoxy, especially when wet. In spaces where water, oils, or powders end up on the floor, that difference matters.

The texture also does a second job: it hides dirt. A solid-color smooth floor shows every scuff, dust film, and tire mark. A speckled flake blend breaks up the visual field, so day-to-day grime simply doesn't read the same way. For retail and customer-facing spaces, that means the floor looks clean longer between moppings.

Durability and Maintenance

A broadcast flake system sealed with a quality topcoat handles forklifts, dollies, stools, and dropped hand tools far better than paint or a thin single coat. If a section does take damage, spot repairs blend in better on flake than on solid color, because the speckle pattern breaks up any patch line.

Maintenance is basic: dust mop or sweep, damp mop with a neutral cleaner, and avoid abrasive pads. No waxing, no resealing on any short schedule. The sealer takes the wear so the flake layer underneath stays intact.

Choosing a Blend

Blend choice is made from physical samples, not from a screen. Colors on a monitor or phone never match what cured resin and flake actually look like under your lighting, and commercial lighting varies a lot. We bring sample boards so you can see full-size blends against your walls, your cabinetry, and your actual light conditions before committing. There are dozens of standard stock blends, and custom blends are possible if none of the stock options fit.

What Drives Cost

We don't post firm prices, because concrete condition changes the number. What moves cost up or down:

Most commercial flake projects land in a mid-range band once prep is scoped. A site visit and written quote will give you exact numbers for your floor, not estimates based on averages.

Our Process

  1. Site visit and slab assessment.
  2. Written quote with scope, system, and timeline.
  3. Surface prep by grinding, plus crack and joint repair as needed.
  4. Base coat, flake broadcast, cure.
  5. Scrape and seal with topcoat.
  6. Walkthrough and written warranty on workmanship.

Installed floors carry a written warranty on workmanship, and we stand behind it.

Get a Quote

If you're considering flake and chip epoxy floors for a property in Grosse Pointe Woods, MI, the next step is simple: fill out the quote form on our website. Tell us the square footage, the current floor condition, and how the space is used, and we'll follow up to schedule a look and give you a written quote.