Flake and Chip Epoxy Floors in Ferndale, MI

Flake and chip epoxy floors in Ferndale MI are a practical choice for commercial spaces that take abuse: retail back-of-house, auto bays, salons, dog daycare, cafés, and workshop floors. The system is a broadcast method — a base coat of resin goes down, vinyl flake chips are cast into it by hand until the surface rejects no more, and once it cures, the excess is scraped and the whole floor gets sealed with a topcoat. What you end up with is a hard-wearing, speckled surface with real texture underfoot.

How the Broadcast System Works

This isn't a single roller coat. A proper flake floor is built in layers:

  1. Base coat — resin applied to the prepared slab.
  2. Flake broadcast — vinyl chips thrown into the wet resin until saturation. Full saturation is the goal; anything less shows bare patches as the floor wears.
  3. Scrape and sand — once cured, loose flakes are scraped off and the surface is knocked down so it's flush.
  4. Seal coats — one or more topcoats lock the flake in and set the final sheen, from matte to gloss.

The flake does two jobs at once. Visually, the speckled blend breaks up the surface so dust, hair, scuffs, and tire marks don't read the way they do on a solid-color floor. Physically, the chips add texture, which is why a flake floor reads as less slippery than a smooth epoxy coat — especially once a matte or satin sealer goes on top. That combination of grip and hide-dirt appearance is the reason flake and chip epoxy floors are common in garages and high-traffic commercial floors alike.

Choosing Your Blend

Flake comes in blends of different chip colors and sizes, and the blend you pick changes the whole look of the floor — from neutral grays and tans to bolder multi-color mixes. We make the choice from physical samples, not from a screen. Monitor colors shift, and a blend that looks right on a phone rarely looks right on 2,000 square feet of concrete. You'll see actual flake samples against your space's lighting before anything is ordered.

If you want a deeper rundown of the system itself — chip sizes, sealer options, and where broadcast floors outperform other coatings — see our main guide to flake epoxy flooring.

Cost Drivers for Ferndale Commercial Projects

We don't quote firm prices without seeing the slab, but the main factors are consistent:

Most commercial flake projects land somewhere in a broad middle range once these are weighed. The quote form on this site is the fastest way to get a real number for your space.

Why Ferndale Property Owners Choose Flake

Ferndale MI has no shortage of older commercial buildings with concrete slabs that have seen decades of use. Flake systems handle that reality well: they bond to properly prepared concrete, tolerate forklift and foot traffic, clean up with a mop or auto scrubber, and keep looking decent between cleanings because the pattern hides what a solid floor would show. Installed floors come with a written warranty on workmanship — not a verbal promise, a document.

For a look at the broader picture, including our work across the area, see epoxy flooring in Ferndale.

Get a Quote

If you're considering flake and chip epoxy floors for a commercial space in Ferndale, the next step is simple: fill out the quote form on our website. Tell us the square footage, what the space is used for, and any known slab issues, and we'll follow up with a site visit and a written estimate. No pressure, no obligation — just a straight answer on what your floor needs.