Flake and Chip Epoxy Floors in Eastpointe, MI

If you manage a shop, garage, showroom, or light-industrial space in Eastpointe, MI, flake and chip epoxy floors are worth a hard look. The system is straightforward: a base coat of resin goes down, vinyl flakes are broadcast into it while it's wet, and once it cures, the surface is scraped and sealed with a clear topcoat. The result is a hard-wearing, slip-resistant floor with a speckled finish that hides dirt, dust, and scuffs far better than a smooth, single-colour coat.

For most commercial property owners, that last part is the real selling point. A plain coated floor shows every tyre mark and every footstep. A flake floor doesn't.

How the Broadcast System Works

The flake layer isn't a decoration sitting on top - it's cast into the resin. Flakes are thrown by hand into the wet base coat until the surface is fully covered. After curing, the excess is scraped back, the floor is sanded or screened, and one or more clear coats go over the top to lock everything in.

The sealer is what you actually walk on. That topcoat takes the wear, which means the floor's lifespan depends heavily on how much resin sits over the flake and how well it was applied. That's where contractor quality matters more than product brand.

Why Flake Reads as Less Slippery

A smooth epoxy coat can feel slick when wet, and that's a legitimate concern for entryways, wash bays, and garages. Flake changes the equation. The chips sit at slightly different angles and create a fine texture across the surface, so your shoe or tyre contacts the high points rather than a continuous film. More flake broadcast and heavier topcoat build means more texture. If slip resistance is a priority for your space, say so upfront - the broadcast rate and topcoat choice can be adjusted for it.

Choosing a Blend

Flake comes in standard blends and custom mixes. Colour chips and physical sample boards are the only honest way to choose - a photo on a screen shifts colour depending on your monitor and the room's lighting. We bring samples so you can see the blend against your actual floor, under your actual lights. Blends range from neutral greys and tans that hide dirt well, to bolder mixes that suit retail or showroom spaces. Neutral blends with fine flakes tend to be the most forgiving in high-traffic areas.

What Drives Cost

We don't quote firm prices without seeing the slab, but the main cost drivers are consistent:

Expect a commercial flake floor to sit above the price of a basic solid-colour coat, and for good reason - the material and labour in the broadcast and sealing stages are both higher.

Warranty and Next Steps

Every installed floor carries a written warranty on workmanship. If something goes wrong because of how the floor was installed, it's covered in writing - not just a verbal promise.

To get a proper number for your space, use the quote form on our website. Tell us the square footage, what the space is used for, and roughly what shape the concrete is in. We'll follow up to look at the slab before quoting.

For a broader look at how these systems compare, see our guide to flake epoxy flooring, or browse our work in Eastpointe and nearby communities.

Ready to talk about your floor? Fill out the quote form on this site and we'll take it from there.