Flake and Chip Epoxy Floors in Allen Park, MI

If you run a commercial space in Allen Park, MI, and you're tired of grey concrete that shows every scuff, flake and chip epoxy floors are worth a serious look. A flake system is a broadcast floor: we roll down resin, cast vinyl flakes into it while it's wet, scrape and sand it back, then seal it with clear coats. The result is a speckled, textured surface that holds up to foot traffic, hides dirt between cleanings, and grips better than a smooth coat.

How the Broadcast System Works

The build is straightforward:

  1. Prep. Grind the concrete to open the surface and remove old coatings. Coating over dirty or smooth concrete is how floors peel, so this step gets the most time.
  2. Base coat. Pigmented epoxy rolled onto the prepped slab.
  3. Broadcast. Flake is thrown into the wet resin by hand until it rejects — the surface can't take any more. Full rejection is what gives the dense, even speckle.
  4. Back and seal. Once cured, we scrape the excess standing flake, sand it flush, then lock everything in with one or more clear coats.

That top coat is what you actually walk on, so its thickness and quality matter. More coats equal a smoother, glossier floor; fewer coats leave more texture.

Why the Texture Matters

The obvious question with any resinous floor is slip resistance. A smooth, glossy coat can get slick when wet. Flake changes that. The chips sit in the resin and break up the surface, so there's always texture underfoot. It reads and feels less slippery than a flat coat, which is why flake systems are common on floors where water, dust, or spills show up — shop floors, restrooms, salons, break rooms, garage-style service bays.

The same texture and speckle also hide dirt. A flake floor still needs sweeping and mopping, but it doesn't show every hair and scuff the way a solid colour does. For busy commercial spaces in Allen Park MI, that's a real day-to-day difference.

Choosing a Blend From Samples, Not a Screen

Flake comes in blends of two to six colours — greys, tans, blues, blacks, and everything in between. One warning from experience: do not pick your blend from a photo on a monitor. Screens shift colour, and flake blends especially don't translate — the mix ratios, chip sizes, and lighting all change how a floor reads once it's down.

We bring physical samples. Set them on your actual slab, under your actual lighting, and look at them next to your walls and equipment before you commit. It takes ten minutes and it's the difference between a floor you like and a floor you'd rather not look at for ten years.

What Drives the Cost

We don't quote firm prices without seeing the floor, because the honest answer is that slab condition moves the number more than anything else. Cost drivers include:

As a rough frame, commercial flake systems generally fall in the range you'd expect for multi-layer resinous flooring — more than a single-coat sealer, well under what tile or polished overlay systems run. Get a real number through a site visit.

Our Workmanship Warranty

Installed floors come with a written warranty on workmanship. If the installation fails because of how we built it, that's on us to fix — in writing, not as a verbal promise.

Get a Quote

Ready to talk about flake and chip epoxy floors for your space? Send us the details through the quote form on our website. We'll look at the slab, walk you through sample blends in person, and give you a straight answer on scope and cost. For more on our service area, see Allen Park, MI, or read the full guide to flake epoxy floors to understand the system options before you commit.