Epoxy Floor Repair and Recoat in Ypsilanti, MI

If you are looking for epoxy floor repair and recoat in Ypsilanti MI, you probably already have a floor that is failing in specific spots rather than everywhere. Worn traffic lanes. Peeling along an expansion joint. Hot tyre lift where forklifts turn in the same arc every shift. Impact damage where a dropped part took a chunk out of the coating.

Most of those problems are repairable. The coating is brought back to sound material, the damaged areas are re-profiled, and a fresh wear coat goes over the whole slab so the floor reads as one surface again instead of a patchwork.

This page explains how we approach that work on commercial properties in Ypsilanti, Michigan, and — just as important — when a recoat is the wrong answer.

What We Repair and Recoat

An epoxy floor repair and recoat project on an existing resin floor typically covers:

The goal is always the same: get the coating back to a sound, bonded surface and put a wear coat on top that will actually last, rather than paint over a problem.

How the Work Runs

  1. Assessment. We walk the floor, map the failure points, and test adhesion in suspect areas. This is where we find out whether the failure is cosmetic, local, or systemic.
  2. Preparation. Failed coating is removed by mechanical grinding. Sound areas are keyed up so the new coat bonds properly. No recoat survives on an unprepared surface.
  3. Repair and re-profiling. Damaged concrete is patched, cracks and joints are filled, and low spots are built back level where needed.
  4. Recoat. Base repairs are spot-primed, then a full wear coat goes over the entire floor so thickness and sheen are consistent edge to edge.

When a Recoat Is the Wrong Answer

Sometimes a recoat just delays the inevitable. If the original coating was applied over contaminated or unprepared concrete, or if moisture is pushing up through the slab, peeling will come back — and it will come back under a new coat too.

If widespread delamination shows up during assessment, the honest recommendation is to take the floor back to the concrete and start over. We say that before the work is quoted, not after the check clears. It costs us the bigger job sometimes. It is also why our recommendations are worth listening to. For a full breakdown of repair-versus-replace decisions, see our epoxy repair overview.

What Drives Cost

We do not quote blind, and we will not invent numbers here. What actually moves the price on an epoxy floor repair and recoat:

A small recoat over a sound floor is a short job. A floor with systemic adhesion failure is a different project entirely, which is exactly why the assessment comes first.

Serving Ypsilanti Commercial Properties

We work with warehouse, manufacturing, retail, and garage floors across Ypsilanti MI and the surrounding area. Every installed floor carries our written warranty on workmanship — terms are put in writing before work starts, and we honour them. For a broader view of the area we cover, see our Ypsilanti service page.

Get a Quote

If your resin floor is wearing out, peeling, or lifting at the tyres, submit the quote form on our website. Include the approximate square footage, a description of the failure, and a few photos if you have them. We will assess the floor and tell you plainly whether a repair and recoat makes sense — or whether you would be better served by starting over.


Ready to fix the floor properly? Use the quote form on our website to request an assessment for epoxy floor repair and recoat in Ypsilanti MI. Straight answers, written scope, written warranty.