If you're looking for epoxy floor repair and recoat in Auburn Hills MI, the most useful thing we can tell you up front is this: not every worn floor needs a full tear-out, and not every worn floor can be saved with a recoat. The job is figuring out which one you have — and telling you honestly before any work starts.
We work on commercial and industrial resin floors across Auburn Hills — warehouses, shops, service bays, and light manufacturing floors that have seen years of forklift traffic, dropped pallets, and hot-tyre pickup.
A recoat only works if the existing coating is still bonded to the slab. So the first step is always an inspection of the current floor, looking at:
If the existing coating is well bonded, the wear is cosmetic — scuffing, dulling, light scratching, minor surface abrasion — then a mechanical grind and one or two new coats is usually the economical route. We abrade the surface, repair localized damage, and rebuild the film. You keep most of the existing floor and get a refreshed, sealed surface.
Sometimes a recoat is the wrong answer, and we say so before the work, not during. If the coating has failed broadly — widespread peeling, delamination across large areas, a product that was never compatible with the traffic, or contamination that can't be cleaned out — the honest fix is to remove the old coating back to bare concrete and start again. It costs more up front. Recoating a floor that needed stripping costs more in the long run, because you pay twice.
That decision gets made on inspection, with the reasons explained, so you can budget with real information.
We don't publish firm prices because square footage, condition, and specification vary too much. What moves the number:
We'll give you a written quote with all of this broken out.
Not every job needs a full recoat. Localized epoxy floor repair and recoat work — patching spalled concrete, rebuilding failed joints, blending repairs into an intact coating — is a routine part of what we do. For a broader look at repair methods, see our epoxy repair guide.
Floors we install are covered by a written warranty on workmanship. We hand it over with the completion paperwork, and we honour it.
The fastest way to find out whether your floor needs a recoat or a strip-back is to have us look at it. Send the details through the quote form on our website — include the floor's approximate size, what's currently on it, and what's failing — and we'll arrange an inspection and a written quote.