Basement and Interior Floor Coating in Ann Arbor, MI

If you manage commercial property in Ann Arbor, Michigan, basement and interior floor coating is one of those jobs where doing it right the first time matters more than anywhere else in the building. A coated slab in a conditioned retail space and a coated slab below grade face very different conditions. Below-grade concrete sits against soil that holds moisture, and that moisture moves through the slab and pushes up against whatever coating is on top. That behaviour — not appearance — decides whether the floor lasts ten years or peels within a season.

We handle basement and interior floor coating for commercial properties across Ann Arbor, MI: mechanical rooms, storage areas, finished lower levels, showrooms, back-of-house corridors, and anywhere else bare concrete takes traffic or needs to be sealed.

Why Below-Grade Slabs Behave Differently

Concrete is porous. When a slab sits below grade, water vapour from the surrounding soil migrates through it as vapour pressure. If a coating is installed over a slab pushing significant vapour, that pressure builds under the film. The usual failure signs: blistering, cloudy spots under the coating, peeling in sheets, or adhesive lifting if the floor is also serving another finish.

This is why the sequence matters more than the product. Anyone can roll epoxy on a dry-looking floor. The question is what that floor does on a humid August week or after a spring thaw.

Testing First Isn't an Upsell

We test slab moisture before recommending a system — typically calcium chloride and internal relative humidity testing, plus a pH check where a history of contamination is possible. Reading those results tells us whether the slab needs a moisture-tolerant primer, an epoxy moisture barrier coat, or whether it's dry enough for a standard system.

We'd rather be blunt about it: skipping testing is how a basement floor fails in a season. It costs less to test than to strip and redo a failed floor, and a coating bid that skips testing is not a cheaper bid — it's a deferred cost. This applies to any basement and interior floor coating project, not just ours.

Systems We Install

The right system depends on slab condition, moisture readings, and use:

Coverage ranges vary with slab condition. Surface prep is usually the biggest cost driver — diamond grinding or shot blasting, crack and joint repair, and oil or contaminant removal — followed by film thickness and the number of coats. Budget ranges for commercial interior work generally run from a basic sealed-and-single-coat system at the low end to multi-coat epoxy systems with barrier coats at the high end. We don't quote firm prices without seeing the slab.

For a fuller breakdown of system options and prep standards, see our basement floor coating guide.

Serving Ann Arbor Commercial Properties

We work with property managers, facility owners, and general contractors throughout Ann Arbor and the surrounding area. Every installed floor is backed by a written warranty on workmanship — not a verbal promise, an actual document with terms you can read before the job starts.

Get a Quote

The fastest way to start is the quote form on this site. Send us your property address, floor square footage, and a rough description of how the space is used. If you have prior floor plans or know the slab's age and whether there's a vapor barrier under it, include that — it changes what we recommend. We'll schedule a slab evaluation, run moisture testing where it's warranted, and quote the system that fits your floor, not the cheapest one on a sheet.