Illustrative composite based on typical scenarios. Names, companies, and figures are representative examples, not a specific verified customer.
Commercial and industrial epoxy flooring jobs tend to start the same way: an owner has a concrete floor that's fighting them. Dust tracking through the shop, oil soaking in where it never comes out, forklifts chewing up the surface, and customers or inspectors noticing. In metro detroit, where facilities run year-round through freeze-thaw cycles and salt gets tracked in all winter, bare concrete doesn't stay decent for long.
This page walks through the shape of a typical project — not a specific client, just what we see again and again.
A warehouse and light-assembly operation was dealing with the usual combination. The slab had been patched over the years, so the surface was uneven. Oil and coolant spots had darkened whole lanes where equipment sat. Housekeeping took longer than it should because nothing swept clean off bare concrete. And management wanted a floor that could handle forklift traffic, dropped tools, and the occasional spilled solvent without looking worse every month.
The floor wasn't failing catastrophically. It was just slowly getting worse while costing the business time every day.
Every commercial and industrial epoxy flooring job starts with the slab, not the coating. We grind to remove surface contamination and open the pores, repair cracks and joints, and address the patches so they stop telegraphing through. Specification depends on what crosses the floor and what gets spilled on it — a forklift-heavy warehouse needs a different build than a light fabrication shop, and a solvent-handling area needs more chemical resistance than a packaging line.
Thickness, topcoat type, and texture are all driven by the actual traffic and exposure. There's no one-size system that fits a loading dock and a production floor alike.
Downtime is the real cost for most operations, so scheduling is usually phased. We work in sections, keeping aisles and critical areas open while each zone cures. A typical phased project lets the business keep running — maybe shifted around slightly — rather than shutting the doors for a week. Cure windows between coats and before full traffic are planned into the sequence so nobody drives on a floor that isn't ready.
The kind of outcome an owner should expect: a uniform, light-colored floor that sweeps clean, doesn't absorb oil, holds up to forklift traffic, and makes spills visible instead of invisible. Housekeeping time drops. The floor stops getting worse. Joint and crack repairs stop collecting debris. Inspections go easier because the facility simply looks maintained.
No invented statistics here — but the practical change is consistent: a floor that was a daily annoyance becomes something nobody has to think about.
We won't quote a firm price without seeing the slab, because prep condition, thickness, and square footage move the number significantly. Cost drivers include surface prep requirements, repairs, system thickness, and how phasing affects the schedule. As broad context, commercial-grade systems generally fall in a range of a few dollars per square foot on the low end to considerably more for heavy-duty builds — the honest answer comes from looking at your floor.
Our installed floors carry a written warranty on workmanship, and we honour it. The terms depend on the system, and you'll see them in writing before work starts.
For a deeper look at system options, see our commercial epoxy flooring guide.
If this sounds like your facility, the next step is simple: fill out the quote form on our website. Tell us the square footage, what crosses the floor, and what gets spilled on it. We'll come look at the slab and give you a real answer — no obligation, no phone tag.