If you're budgeting for epoxy flooring or a concrete floor coating project, an on-site assessment is the step where real numbers become possible. Photos and floor plans help, but no installer can quote responsibly without seeing the slab. This guide walks you through what to expect at an on-site assessment, so you can prepare your facility and get the most out of the visit.
Concrete floors vary enormously, even within one building. Age, previous coatings, moisture conditions, and how the slab was poured all affect which coating system will hold up and what the preparation will cost. A contractor who quotes from photos alone is guessing — and guesses usually get corrected with a change order later.
A little preparation makes the assessment faster and more accurate:
Expect the visit to take somewhere between 30 minutes and a couple of hours depending on the size and complexity of the space. A thorough assessment typically includes:
1. Slab inspection. The assessor walks the floor, marks cracks and joints, checks for surface contamination, and looks at how the concrete was finished. Older slabs with a hard-troweled or burnished finish need more aggressive preparation before a coating will bond.
2. Moisture evaluation. Moisture vapor coming up through the slab is the single most common cause of coating failure. The assessor will check moisture conditions — often with a simple surface test on-site, and sometimes with a more formal in-slab test if the building history suggests a risk. If mitigation is needed, it's better to know now.
3. Condition testing. This can include checking for curing compounds, sealers, or adhesives from old floor coverings, and testing how well any existing coating is bonded. What comes off during this step determines how much grinding or shot blasting the job needs.
4. Measuring and documenting. Accurate square footage, joint layout, expansion joints that need treating, wall lines, drains, and doorways. Details like cove base (where the floor curves up the wall) add material and labor, and they need to be measured, not estimated.
5. A conversation about use. Expect questions about how the space operates: when it can be taken out of service, what equipment runs over the floor, temperature ranges, and cleaning practices. A warehouse aisle and a commercial kitchen need different systems even under identical concrete.
A professional assessment leads to a written proposal, not a verbal estimate shouted over the noise of the shop floor. That proposal should specify:
On installed floors, work should be backed by a written warranty on workmanship. Ask to see it in writing before you sign anything — a warranty you haven't read isn't a warranty.
No honest contractor gives firm numbers without seeing the slab, but the factors that move cost are predictable:
Ranges vary by region and market conditions, so treat any quote that arrives without a site visit with suspicion.
If you're planning a concrete floor coating project, the next step is simple: submit the quote form on our website with your location, approximate square footage, and a description of the space. We'll schedule an on-site assessment and follow up with a written proposal you can actually rely on. No pressure, no obligation — just a proper look at the slab before anyone talks numbers.