If you're comparing quotes for epoxy flooring or another concrete floor coating system, the bids can look similar while the work behind them varies a lot. The difference usually comes down to prep, materials, and how the installer handles problems after the floor is down. This page gives you the questions to ask before hiring a floor coating installer — and what a good answer sounds like — so you can compare contractors on substance instead of price alone.
How will you prepare the concrete?
This is the most important question on the list. Coatings fail at the bond line, and the bond depends on preparation. You want to hear about mechanical grinding or shot-blasting to a concrete surface profile, not just "we'll clean and etch it." Ask how they handle oil stains, old coatings, moisture, and cracks.
Will you test the slab for moisture?
Moisture vapor coming up through the slab is a common cause of peeling and blistering. A reputable installer will check moisture conditions before recommending a system, especially on ground-level slabs or older concrete. If nobody mentions moisture testing, ask why not.
What coating system are you proposing, and why?
Epoxy flooring is one option, but polyurethane, polyaspartic, and hybrid systems exist for different conditions. The answer should reference your actual use case: forklift traffic, chemical exposure, wash-downs, UV exposure, thermal shock. "One system fits everything" is a red flag.
What film thickness and number of coats are included?
Thickness specs vary widely, and a cheap bid often means fewer coats or a thinner build. Ask for the mil thickness per coat and the total system build in writing.
Who manufactures the products, and are they rated for my environment?
Named manufacturers with technical data sheets are a good sign. Ask for the TDS for whatever they're proposing — it should state chemical resistance, abrasion resistance, and intended use.
Do you use employees or subcontractors?
Either can work, but you should know who is actually on your floor. Ask who supervises, what training they have, and whether the same crew will be on site start to finish.
What is the realistic timeline, including cure time?
Ask how long the job takes, how long before the floor can take foot traffic, and how long before it can take forklifts or full loads. Also ask what happens if the schedule slips — who absorbs that cost?
How will you contain dust and disruption?
Grinding creates dust. Good crews use vacuum-equipped equipment and seal off adjacent areas. If you're coating an occupied facility, ask about phasing so parts of your operation can keep running.
What exactly is included in this price?
Compare bids line by line: prep method, moisture mitigation if needed, number of coats, patching, joint fill, line striping, disposal. A low bid that skips prep or a primer coat will cost more in the long run.
Is the warranty in writing, and what does it cover?
Get the warranty in writing before you sign. A written warranty on workmanship means the installer comes back and makes it right if the coating fails from installation error — not a verbal promise that evaporates when something goes wrong. Ask what the warranty excludes (damage from impact, misuse, or substrate movement is typically excluded) and what the claim process looks like.
What are your cost drivers?
No honest contractor can quote a firm price without seeing the slab. Cost depends on square footage, the condition of the concrete, how much prep and repair it needs, the system specified, and how much phasing around your operations is required. Anyone quoting firm numbers over the phone without inspection is guessing.
Can I see floors you've installed recently, ideally in my industry?
Ask for facilities you can visit or photos of comparable work — same traffic, same environment. Talk to the facilities manager if you can, not just the owner.
What is your process if something fails a year from now?
You're listening for a clear path: documented warranty, a named contact, and a defined response time. Vague answers here tell you everything you need to know.
Bring this list to your site walk. A good installer will welcome detailed questions; a bad one will get vague. When you're ready for a site assessment and a written quote, submit the quote form on our website with your square footage, location, and a description of how the floor is used. We'll inspect the slab, test conditions, and give you a system recommendation with everything above in writing.