How a commercial floor spec is actually decided

If you've ever been handed three quotes for a commercial floor and seen three different recommendations — epoxy flooring from one, a polyaspartic system from another, and "seal and done" from a third — you've probably wondered whether someone is padding the job. Usually they're not. The differences come down to how each contractor read the same set of site conditions and weighed them against your budget and schedule.

This page walks through the actual decision process, in the order it happens, so you can follow along when the spec lands in your inbox.

Step 1: The substrate gets graded

Every concrete floor coating decision starts below the surface. The installer will look at:

The prep findings are the single biggest driver of cost variance between quotes. Two contractors looking at the same slab can reasonably disagree on how much repair it needs; that disagreement shows up as a price difference.

Step 2: Use drives the system

Once the slab is understood, the question shifts to what the floor has to survive. A warehouse forklift aisle, a commercial kitchen, and a retail back-of-house all point to different answers even on identical concrete.

Typical considerations:

This is where a lot of epoxy flooring conversations get settled: it's a strong, economical choice for many commercial uses, but it isn't the right answer everywhere, and a contractor who explains why a given system fits (or doesn't) is usually the one you can trust.

Step 3: Budget and timeline get traded off

Every floor project is a balance between what you'd ideally install and what you can reasonably spend and shut down for. The honest way this gets decided:

Rather than a firm price here — which depends on your slab, your region, and the system — think in terms of drivers: square footage, prep intensity, repair volume, number of coats, and how quickly you need it back in service. Any of those can swing the number materially, which is why quotes should itemise prep separately from materials and application.

Step 4: The paperwork closes the loop

A real spec includes more than a product name. Look for:

What this means for your next quote

If you're comparing proposals, ask each contractor to explain, in writing: what they found on the slab, what system they recommend, and what condition or use drove that recommendation. When you understand how a commercial floor spec is actually decided, the differences between quotes stop looking like noise and start looking like decisions you can evaluate.


Get a floor spec for your space

Submit the quote form on our website with a few details about your facility — square footage, current floor condition, and what the space is used for. We'll assess the slab, walk you through the options, and put the recommendation in writing, including our written workmanship warranty.