If you are weighing up a weekend coating job against bringing in a contractor, it helps to be clear on diy garage floor kits: what they do and do not include before you buy anything. These kits are real products that can work in the right situation. The problem is that most marketing shows you the finished floor and never the scope of what arrives in the box.
A typical concrete floor coating kit contains the coating itself — usually a one- or two-part epoxy flooring product, sometimes a polyaspartic or acrylic alternative — plus basic application tools. Depending on the brand, you might get:
That is the honest inventory. You supply the labour, the time, and everything else.
This is where most facility budgets get caught out. Kits generally leave you to arrange:
Kits are a legitimate choice when the slab is in good condition, moisture is not a concern, appearance matters more than longevity, and the space is lightly used. A domestic double garage used for parking gets reasonable value from a kit. If it fails in a few years, you have not lost much beyond the materials and a weekend.
For a commercial or light-industrial space — forklift traffic, hot-tyre pickup, chemical spills, vehicle bays turning over daily — a kit is usually a false economy. Professional epoxy flooring systems use higher-solids materials, apply multiple coats at proper thickness, and test the slab before anything gets poured. Thickness matters: a single thin kit coat wears through under abrasion far faster than a built-up system.
We will not quote firm prices here because every slab is different, but these are the factors that move the number in either direction:
A fair comparison: add up the kit price, the grinder hire, the repair products, your labour hours, and the expected lifespan. Then compare that against an installed system quoted on your actual slab.
When a professional contractor installs your floor, you should receive a written warranty on workmanship — a commitment to the preparation, application, and finished result, not just the material in a tin. Ask any contractor what theirs covers and get it in writing before you commit.
The honest way to decide is to have the floor assessed first. Tell us the approximate area, what the space is used for, and what condition the concrete is in, and we will tell you whether a kit could work or whether an installed system is the better spend.
Request a quote through the form on our website. There is no obligation, and you will get an assessment based on your actual floor rather than a guess.