How do I prepare for Epoxy Floor Repair and Recoat?

If you're asking how do I prepare for epoxy floor repair and recoat, the short answer is: clear the floor completely, note every defect you've seen, and make sure the slab can be cleaned and dried before the crew arrives. Everything else flows from those three things.

First, empty the space. Vehicles, pallet racking, toolboxes, anything bolted to or resting on the floor needs to move. A recoat only bonds properly to a clean, prepared surface, and every hour spent shifting equipment during the job costs you money.

Second, walk the floor and list the damage. Hairline cracks, oil stains, peeling patches, soft spots near floor drains. Mark them with chalk or tape. If the recoating contractor doesn't know where the failures are, they can't tell you whether a recoat will actually hold.

Third, deal with moisture and contamination. If the slab has known moisture issues or heavy oil saturation, say so up front. These affect both the method and the cost, and they can't be fixed with another coat of resin.

Sometimes a recoat is the wrong answer

This needs to be said before work starts, not halfway through the job. If the existing coating is failing across large areas, or the bond to the concrete has broken down, a recoat will peel off with the old layer. In that case the floor needs grinding back to concrete and a full reinstallation. For how we assess that, see our epoxy repair page: pillars/epoxy-repair/epoxy-repair.md

What drives the cost

Expect pricing to move with square footage, the amount of crack and spall repair needed, surface prep requirements (shot blasting versus light abrasion), and whether the job needs a moisture barrier. Recoating an intact floor is the low end; taking it back to concrete is a different order of cost entirely.

Work installed on your floor is backed by our written warranty on workmanship.


Ready to get a straight answer on your floor? Submit the quote form on our website with your floor dimensions and a description of the damage, and we'll tell you whether a recoat or a full repair is the right call.