The short answer: clear the space, and let your installer test the slab for moisture before anything gets applied. Most of the real preparation happens on the contractor's side — the biggest thing you can do is make sure the floor is accessible and that moisture testing happens before install day, not after a failure.
Below-grade slabs can push moisture up through a coating. Concrete is porous, and ground moisture wicks through it as vapor. If a coating is applied over a damp slab, the bond fails — peeling, bubbling, or lifting, often within a season. This is exactly how basement floors fail prematurely.
That's why testing first is not an upsell. It's the step that determines whether the floor can be coated as-is, needs a moisture-mitigating primer, or needs to dry out first. Skipping it to save a little time or money is the single most common cause of failed basement and interior floor coating jobs. Any reputable installer will insist on it, and you should be skeptical of one who doesn't.
Surface prep (grinding or shot-blasting), crack and joint repair, moisture testing, and application are all handled by the installation crew. Workmanship on installed floors is backed by a written warranty.
For a full breakdown of systems, prep methods, and cost drivers, see our guide to basement floor coating.
Ready to move forward? Submit the quote form on our website. We'll assess your slab, test for moisture, and give you a clear scope before any work begins.