Garage Floor Coating: Case Study 2

Illustrative composite based on typical scenarios. Names, companies, and figures are representative examples, not a specific verified customer.

This page walks through a typical garage floor coating project in metro Detroit, written as a generic example rather than a write-up of one specific customer. The point is to show the shape of the job: what usually goes wrong with a garage slab, what the process actually looks like, and what an owner should plan for before committing.

The Problem

Most two- and three-car garages in southeast Michigan share the same slab history. The concrete was poured decades ago, has been through hundreds of freeze-thaw cycles, and has absorbed road salt every winter off the tires of the family vehicles. By the time an owner calls, the floor usually shows some combination of the following:

A garage floor coating applied over an unprepared slab will not survive this environment. That is the single most common failure we see on floors installed by others — the product was fine, the prep was not.

The Approach

Slab prep comes first, and it takes longer than the coating itself. In a typical project:

  1. Assessment. The slab is checked for moisture, existing coatings or sealers, cracks, and structural movement. A slab with an active moisture problem or a settling crack is a different conversation than one that needs surface work.
  2. Grinding and cleaning. The surface is mechanically ground to open the concrete profile and remove old sealers, stains, and dust. Degreasers handle oil spots.
  3. Crack and pit repair. Hairline cracks and salt pitting get filled so they do not telegraph through the new coating.
  4. Coating application. Base coat, optional flake broadcast, and clear topcoats, applied within the manufacturer's temperature and humidity windows — which matter in a Michigan garage.
  5. Written warranty. Installed floors carry a written warranty on workmanship, documented on paper, not a verbal promise.

For more on the systems and options available, see our main guide: Garage Floor Coating.

What an Owner Should Expect

Timeline. The garage is out of use for a few days. Prep takes most of one day, coating goes down the next, and the floor needs cure time before it can handle foot traffic, then longer before vehicles drive on it. This is scheduled in advance so the household can plan around it — move tools, bikes, and storage out first.

Disruption. Minimal beyond the garage itself. The work is contained; there is no demolition dust beyond normal grinding, and nothing inside the house is affected.

Cost drivers. We do not publish firm prices, because the variables are real. The main drivers are:

Condition matters more than colour choice. A plain grey floor over a properly prepped slab will outlast a decorative floor over a rushed one, every time, in this climate.

The Takeaway

Salt and freeze-thaw will test any garage floor in metro Detroit. The projects that hold up are the ones where prep was done properly, cracks were addressed honestly, and cure times were respected. If you want an assessment of your own slab, use the quote form on this website — include approximate garage dimensions and the rough age of the slab, and you will get a straightforward answer about scope and cost drivers.