Flake and Chip Epoxy Floors: Case Study 2

Illustrative composite based on typical scenarios. Names, companies, and figures are representative examples, not a specific verified customer.

This page walks through a typical flake and chip epoxy floors project so you can see what the process actually looks like before you commit. It's a composite, not a single job — but the sequence, decisions, and outcomes reflect how these installs go in real garages and light commercial spaces across metro detroit.

The Shape of the Problem

The floors in this scenario share the same starting conditions we see constantly:

Smooth epoxy alone solves some of this, but it often makes the slip concern worse. That's where the flake system earns its keep. The flakes broadcast into the coating add texture, which is why a flake floor reads as less slippery than a smooth coat under the same conditions.

The Approach

A flake and chip install is straightforward if you don't cut corners:

  1. Grind the concrete. Mechanical preparation is non-negotiable. Coating over contaminated or sealed concrete is the most common failure point we're asked to fix.
  2. Repair and patch. Cracks and spalls get addressed before any coating goes down.
  3. Base coat and broadcast. Pigmented epoxy base, then flakes broadcast to refusal while it's wet.
  4. Backroll and scrape. Once cured, loose flakes are scraped and the surface is leveled.
  5. Clear topcoat. A polyaspartic or urethane topcoat seals the flakes and provides the wear layer.

The one decision owners always underestimate: the blend. Flake colors look completely different in a large area than they do on a sample board or a screen. That's why blend choice is made from physical samples, not from a monitor. Hold the chips against your walls, your cabinets, your lighting. Screen colors lie; physical samples don't.

What an Owner Should Expect

What Drives Cost

We won't quote firm prices on a page — every floor is different. The honest drivers:

If you want a ballpark conversation, the flake epoxy overview covers cost drivers in more detail.

The Warranty

Every installed floor is backed by a written warranty on workmanship. It's in writing because we honor it — read it, ask questions about it, and hold us to it.

Next Step

If the scenario above sounds like your garage or shop, the fastest way to get answers is the quote form on our website. Send your approximate square footage, the floor's current condition, and a few photos. You'll get a straight assessment of what your floor needs — including whether it needs repair work before any coating makes sense.